| 是否进口：否 | 产地：意大利 | 材质：标准 |
| 产品类别：12 | 尺码：22 |
意大利TELLARINI POMPE水泵 ENT40，003568 泉州市海科恩机械设备有限公司
ENT 40 - ENT electric pumps
Maximumcapacity : 140 lt/min
Maximumhead : 17 m
Gasket on the shaft: Seal
Maximumpriming height : 6 m
Threaded ports: 1" ?
Maximumliquid density 1.1g/cm free of hard particles
in suspension
Maximumtemperature 90°C
Not suitable for aggressive liquids towards pump
construction materials and gaskets (see technical
specifications)
Not appropriate for the transfer of petrol, solvents
and, in general, in environments with risk of explosion
and fire
Possibility of reversing the pumping flow
Coupling with impeller free
Complete with a pair of brass hose fittings for pipes
40 (one straight and one curved)
Possibility of working for short periods with closed
pipes
During installation, the pump must be filled with liquid,
subsequently this operation is no longer necessary
Material
Pump Parts: Brass
Shaft : AISI 316
Impeller : Brass
Gaskets: NBR
MOTOR
Powered with a Three-phase asynchronous 400V 50Hz
Equipped with MEC 80 motor (1400 rpm1.2HP / 0,9 KW)
Service S3-80%
Ip protection degree 44
Insulation class F
Power connection via cable end Stripped cable 2m
Switching on and reversing of the pumping flow
through inverter switch
ENT series are professional versions of self-priming brass transfer
pumps. Equipped with an oversized three-phase asynchronous
motor and long life rotary switch, they are designed for heavy duty
applications.
These pumps are equipped with a strong suction capacity, can
operate even with discontinuous presence of the liquid and you
can reverse the B ow. They are really multifunction pumps, able to
solve multiple pumping problems. For each application it is
necessary to verify the suitability and choose the appropriate
gaskets.
The product are particularly suitable for use:
agriculture (fungicides, liquid fertilizers, components on agricultural machinery, irrigation)
professional use (continuous over time and heavy-duty applications, installation on systems)
industry (installation on plant, machinery, machinery, production lines)
ENT 40 - ENT电动泵
容量:140lt /min
水头:17米
轴上的垫圈:密封
引射高度:6米
螺纹端口:1“?
液体密度1.1g/cm，不含硬颗粒
在悬架
Maximumtemperature 90°C
不适用于对泵有腐蚀性的液体
建筑材料和垫片(见技术
规范)
不宜转移汽油、溶剂
一般来说，在有爆炸危险的环境中
和火
逆转泵送流量的可能性
无叶轮联轴器
配有一对用于管道的黄铜软管配件
40(一直一弯)
短期封闭工作的可能性
管道
安装时，泵内必须充满液体;
随后，该操作不再需要
材料
泵部件:黄铜
轴:AISI 316
叶轮:黄铜
橡胶垫圈:
电动机
采用三相异步400V 50Hz供电
配备MEC 80电机(1400 rpm1.2HP / 0,9 KW)
s3服务- 80%
知识产权保护等级44
F级绝缘
电缆端电源连接剥线2m
开启和反转泵流量
逆变开关
ENT系列是专业版自吸黄铜转印
泵。配备超大三相异步
电机和长寿命旋转开关，专为重载而设计
应用程序。
这些泵都配备有很强的吸力，可以
即使在液体和你不连续存在的情况下也可以操作
可以逆转B波。它们真的是多功能泵，能够
解决多种泵送问题。对于每个应用程序都是如此
必要时验证适宜性并选择合适的
垫圈。
本产品特别适合使用:
农业(杀菌剂、液体肥料、农业机械部件、灌溉)
专业用途(长时间连续使用和重型应用，安装在系统上)
工业(安装在厂房、机械、机械、生产线上)
IONKB-702GM
CLEAR-COMMICROPHONE麦克风GM-18
CLEAR-COMHANDSET CLEAR-COMM\KB-702GM 多船勘探作业通讯设备配件
HANDSET ZENITEL\1008097100 多船勘探作业通讯设备配件
MICROPHONE CLEAR-COM\GM-18 多船勘探作业通讯设备配件
V-BOX BOX\CLEAR-COM\V-BOX 船用通信器材配件
TWO-CHANNEL SPEAKER STATION CHANNEL SPEAKER STATION\CLEAR-COM 船用通信器材配件
MICROPHONE CLEAR-COM\GM18 船用通信器材配件
HANDSET CLEAR-COM\CC-40 船用通信器材配件
